Information and Policies
Introduction
The following concentrations are specializations for the computer engineering student. Students must complete all of the courses listed within their selected concentration. The five concentration differ by only 5 specialized courses; the remaining courses are the same.
Systems Programming Concentration
The systems programming concentration focuses on software systems: courses include operating systems, compilers, software engineering, and advanced programming. Students finishing this concentration are very well prepared for building large software systems of all types. This concentration is the closest one to a computer science major-the main differences are that it does not require computer science theory courses, but because of the core computer engineering requirements, includes more hardware and electronics than a computer science bachelor's degree.
Computer Systems Concentration
The computer systems concentration provides a balance between software and hardware design. Students are prepared for a large variety of different design tasks, especially those requiring the integration of hardware and software systems, but may need further training for any particular specialization.
Robotics and Control Concentration
This concentration covers the hardware, software, sensing, and control aspects of autonomous and embedded systems. Students receive training in the theory, design, and realization of complex systems such as mobile robots. The concentration emphasizes integration of embedded software with hardware systems that interact with the environment.
Networks Concentration
The networks concentration focuses on communication between computers, covering both network hardware and protocols. Students finishing this concentration are well prepared for the design of wired and wireless network systems.
Digital Hardware Concentration
The digital hardware concentration focuses on hardware design and includes more electronics than the other concentrations. Students finishing this concentration are well prepared for building hardware systems. This concentration is the closest one to an electronics major; the main differences are that it does not require as much electronics theory or analog electronic design, but because of the core computer engineering requirements, requires more software skills.
Academic Advising for the Program
The Baskin School of Engineering undergraduate advising office offers general advising for prospective and declared undergraduates majoring in School of Engineering programs. The office handles major declarations, transfer credits, course substitutions, articulations, and degree certifications. Undergraduate students obtain and submit all paperwork requiring departmental approval to the undergraduate advising office. Transfer students should also refer to the Transfer Information and Policy section.
Baskin Engineering Building, Room 225
advising@soe.ucsc.edu
(831) 459-5840
Every major and minor must have a computer engineering faculty adviser, assigned by the Baskin School of Engineering undergraduate advising office, and with that adviser must formulate a program of proposed coursework that meets the major or minor requirements. Additional information can be found on the SOE webpages.
Program Learning Outcomes
For the Computer Engineering B.S. degree, the program learning outcomes are:
-
an ability to apply knowledge of mathematics, science, and engineering;
-
an ability to design a system, component, or process to meet desired needs within realistic constraints;
-
an ability to function effectively on teams that establish goals, plan tasks, meet deadlines, and analyze risk and uncertainty;
-
an ability to communicate effectively; and
-
an ability to use the techniques, skills, and modern engineering tools necessary for engineering practice.
Major Qualification Policy and Declaration Process
Major Qualification
In order to be admitted into the computer engineering major students must be listed as a proposed major within the School of Engineering. Students in the engineering and computing cluster must propose a School of Engineering major before they can declare. Please refer to the School of Engineering's "Proposed Engineering Major Status" and its "Declaring a School of Engineering Major" sections in the catalog for more information.
In addition to being listed as a proposed School of Engineering major, declaration of the computer engineering major in the first six quarters of enrollment at UC Santa Cruz is based on performance in the CE Major Qualification Courses:
Students in their first six quarters who have completed at least 36 credits in the CE Major Qualification Courses listed below will be admitted to the computer engineering major if:
-
their cumulative GPA is at least 2.8 in all of the CE Major Qualification Courses attempted; and
-
they have no more than 7 credits resulting in grades of C-, D+, D, D-, F or NP among all of the CE Major Qualification Courses attempted.
CE Major Qualification Courses
All of the following:
| MATH19A | Calculus for Science, Engineering, and Mathematics | 5 |
| MATH19B | Calculus for Science, Engineering, and Mathematics | 5 |
Plus one of the following
| AM30 | Multivariate Calculus for Engineers | 5 |
| MATH23A | Vector Calculus | 5 |
Whichever is completed first
Plus one of the following
| AM10 | Mathematical Methods for Engineers I | 5 |
| MATH21 | Linear Algebra | 5 |
Whichever is completed first
Plus all of the following
| AM20 | Mathematical Methods for Engineers II | 5 |
| CSE12 | Computer Systems and Assembly Language | 5 |
| CSE12L | Computer Systems and Assembly Language Laboratory | 2 |
Plus one of the following
| CSE13E | Embedded Systems and C Programming | 7 |
| CSE13S | Computer Systems and C Programming | 7 |
Plus all of the following
| CSE16 | Applied Discrete Mathematics | 5 |
| CSE30 | Programming Abstractions: Python | 7 |
| PHYS5A | Introduction to Physics I | 5 |
| PHYS5L | Introduction to Physics Laboratory | 1 |
| PHYS5C | Introduction to Physics III | 5 |
| PHYS5N | Introduction to Physics Laboratory | 1 |
Appeal Process
Students who are informed that they are not eligible to declare the major may appeal this decision by submitting a letter to the undergraduate director through the Baskin School of Engineering undergraduate advising office within 15 days from the date the notification was mailed. Within 15 days of receipt of the appeal, the department will notify the student, college, and Office of the Registrar of the decision.
How to Declare a Major
For instructions about how to declare a major in the Baskin School of Engineering, please refer to the department's website.
Transfer Information and Policy
Transfer Admission Screening Policy
Students should complete at least six of the following
| MATH19A | Calculus for Science, Engineering, and Mathematics | 5 |
| MATH19B | Calculus for Science, Engineering, and Mathematics | 5 |
| AM10 | Mathematical Methods for Engineers I | 5 |
| MATH21 | Linear Algebra | 5 |
| AM20 | Mathematical Methods for Engineers II | 5 |
| AM30 | Multivariate Calculus for Engineers | 5 |
| MATH23A | Vector Calculus | 5 |
| CSE12 | Computer Systems and Assembly Language | 5 |
| CSE12L | Computer Systems and Assembly Language Laboratory | 2 |
| CSE13E | Embedded Systems and C Programming | 7 |
| CSE13S | Computer Systems and C Programming | 7 |
| CSE16 | Applied Discrete Mathematics | 5 |
| CSE30 | Programming Abstractions: Python | 7 |
| PHYS5A | Introduction to Physics I | 5 |
| PHYS5L | Introduction to Physics Laboratory | 1 |
| PHYS5C | Introduction to Physics III | 5 |
| PHYS5N | Introduction to Physics Laboratory | 1 |
Lecture/lab combinations count as one course.
CSE 13E and CSE 13S are alternatives; only one or the other, whichever is completed first, can count toward the six courses.
AM 30 and MATH 23A are alternatives; only one or the other, whichever is completed first, can count toward the six courses.
AM 10 and MATH 21 are alternatives; only one or the other, whichever is completed first, can count toward the six courses.
Cumulative GPA
Their cumulative GPA should be at least 2.8 in all of the courses attempted.
Prospective transfer students entering UC Santa Cruz by Fall 2020 and students who have catalog rights to follow the 2018-19 General Catalog may follow the screening requirements published in that catalog.
Transfer students who wish to graduate in two years are strongly recommended to complete all lower division major requirements and most General Education requirements before coming to UC Santa Cruz.
Getting Started at UCSC as a Transfer Student
Transfer students should declare their major in their first quarter at UC Santa Cruz. Instructions for declaring a major in the Baskin School of Engineering are on the department's website.
Letter Grade Policy
All students admitted to a School of Engineering major, or seeking admission to a major, must take all courses required for that major for a letter grade. This policy includes courses required for these degrees that are sponsored by other departments.
Course Substitution Policy
Undergraduate engineering students who wish to substitute a major course with a course from UC Santa Cruz must first consult the School of Engineering Undergraduate Advising Office. The advising office requires a Petition for Course Substitution be approved before credit for an alternate course can be applied to any School of Engineering major requirement.
Petition forms are available at the undergraduate advising office and online.
Petitions and procedures for approval must be obtained from and submitted to the Undergraduate Advising Office.
Double Majors and Major/Minor Combinations Policy
Students completing the computer engineering major cannot also receive the computer engineering minor or the Network and Digital Technology B.A. degree.
Students completing the Robotics Engineering B.S. can receive the Computer Engineering B.S. as well only by completing a concentration other than robotics and control.
Honors
Majors are considered for “Honors in the Major” and “Highest Honors in the Major” based on their GPA and on results of undergraduate research and other significant contributions to the School of Engineering. Students with a GPA of 3.70, in most cases, receive highest honors. Students with a GPA of 3.30, in most cases, receive honors. Students with particularly significant accomplishments in undergraduate research or contributions to the School of Engineering may be considered with a lower GPA. Computer engineering juniors and seniors may also be eligible for election to the UC Santa Cruz chapter of Tau Beta Pi, the national engineering honor society founded in 1885.
Materials Fee and Miscellaneous Fees
Please see the section on fees under the School of Engineering.
Requirements and Planners
Course Requirements (all concentrations)
All students in the computer engineering major take the same core courses, which give the fundamentals of programming and hardware design, supported by the physics and mathematics necessary to understand them. Students must complete all of the courses listed within their selected concentration, and they must complete the capstone sequence. The senior comprehensive requirement for computer engineering majors is satisfied by completion of the capstone course and the exit requirement.
Lower-Division Courses
All of the following
| MATH19A | Calculus for Science, Engineering, and Mathematics | 5 |
| MATH19B | Calculus for Science, Engineering, and Mathematics | 5 |
Plus one of the following
| AM30 | Multivariate Calculus for Engineers | 5 |
| MATH23A | Vector Calculus | 5 |
Plus one of the following
| AM10 | Mathematical Methods for Engineers I | 5 |
| MATH21 | Linear Algebra | 5 |
Plus all of the following
| AM20 | Mathematical Methods for Engineers II | 5 |
| CSE12 | Computer Systems and Assembly Language | 5 |
| CSE12L | Computer Systems and Assembly Language Laboratory | 2 |
Plus one of the following
| CSE13E | Embedded Systems and C Programming | 7 |
| CSE13S | Computer Systems and C Programming | 7 |
Plus all of the following
| CSE16 | Applied Discrete Mathematics | 5 |
| CSE20 | Beginning Programming in Python | 5 |
| CSE30 | Programming Abstractions: Python | 7 |
| PHYS5A | Introduction to Physics I | 5 |
| PHYS5L | Introduction to Physics Laboratory | 1 |
| PHYS5C | Introduction to Physics III | 5 |
| PHYS5N | Introduction to Physics Laboratory | 1 |
Students with no prior programming will take CSE 20 before CSE 30 and the lecture-lab combination of CSE 12 and CSE 12L. Students with a prior programming course, AP credit, or clearing the “Test-out” bar will start with CSE 30, and the lecture-lab combination of CSE 12 and CSE 12L.
Plus one of the following options
Upper-Division Courses
Core requirements:
| CSE100 | Logic Design | 5 |
| CSE100L | Logic Design Laboratory | 2 |
| CSE101 | Introduction to Data Structures and Algorithms | 5 |
| CSE107 | Probability and Statistics for Engineers | 5 |
| CSE120 | Computer Architecture | 5 |
| CSE121 | Microprocessor System Design | 5 |
| CSE121L | Microprocessor System Design Laboratory | 2 |
| CSE185E | Technical Writing for Computer Engineers | 5 |
| ECE101 | Introduction to Electronic Circuits | 5 |
| ECE101L | Introduction to Electronic Circuits Laboratory | 2 |
| ECE103 | Signals and Systems | 5 |
| ECE103L | Signals and Systems Laboratory | 2 |
Disciplinary Communication (DC) Requirement
Students of every major must satisfy that major's upper-division Disciplinary Communication (DC) requirement. The DC requirement in computer engineering is satisfied by one of the following:
| CSE185E | Technical Writing for Computer Engineers | 5 |
| CSE195 | Senior Thesis Research | 5 |
Comprehensive Requirement
Capstone Requirement
All computer engineering students complete one of the following capstone sequences:
One of the following courses
| CSE123A | Engineering Design Project I | 5 |
| CSE123B | Engineering Design Project II | 7 |
Or all of the following courses
Or the following course
CSE 195 also requires the submission of an approved senior thesis.
Or all of the following courses
| CSE115A | Introduction to Software Engineering | 5 |
| CSE115B | Software Design Project | 5 |
| CSE115C | Software Design Project II | 5 |
Or the following courses
| ECE118 | Introduction to Mechatronics | 5 |
| ECE118L | Introduction to Mechatronics Laboratory | 2 |
ECE 118 and ECE 118L are allowed only if they are not taken as concentration courses.
Exit Requirement
Students are required to complete an exit survey and attend an exit interview. Portfolios of the students work will be collected from our courses for program evaluation. The portfolios will be reviewed by the computer engineering undergraduate committee and will include two project reports: CSE 121 and CSE 121L and either the senior capstone report (CSE 115C, or CSE 129A and CSE 129B and CSE 129C, or CSE 123A and CSE 123B, or ECE 118) or the student’s senior thesis.
Concentration Courses
Computer Systems Concentration Requirements
All students in the computer engineering major take the same core courses, which give the fundamentals of programming and hardware design, supported by the physics and mathematics necessary to understand them. Students must complete all of the courses listed within their selected concentration, and they must complete the capstone sequence. The senior comprehensive requirement for computer engineering majors is satisfied by completion of the capstone course and the exit requirement.
One of the following
| CSE125 | Logic Design with Verilog | 5 |
| CSE125L | Logic Design with Verilog Laboratory | 2 |
| CSE122 | Introduction to VLSI Digital System Design | 5 |
CSE 125/CSE 125L lecture/lab combination counts as a single course.
CSE 222A, Advanced VLSI Digital System Design, may be substituted for CSE 122 with department approval.
Plus one of the following
| CSE111 | Advanced Programming | 5 |
| CSE115A | Introduction to Software Engineering | 5 |
| CSE134 | Embedded Operating Systems | 5 |
Plus one of the following
| CSE130 | Principles of Computer Systems Design | 5 |
| CSE131 | Introduction to Operating Systems | 5 |
Plus one upper-division or graduate elective
From the approved elective list or the department’s approved list of electives for the computer engineering major
Digital Hardware Concentration Requirements
All students in the computer engineering major take the same core courses, which give the fundamentals of programming and hardware design, supported by the physics and mathematics necessary to understand them. Students must complete all of the courses listed within their selected concentration, and they must complete the capstone sequence. The senior comprehensive requirement for computer engineering majors is satisfied by completion of the capstone course and the exit requirement.
All of the following
| CSE125 | Logic Design with Verilog | 5 |
| CSE125L | Logic Design with Verilog Laboratory | 2 |
Plus one of the following options
CSE 222A, Advanced VLSI Digital System Design, may be substituted for CSE 122 with department approval.
Plus one of the following
| CSE122 | Introduction to VLSI Digital System Design | 5 |
| CSE220 | Computer Architecture | 5 |
| ECE171 | Analog Electronics | 5 |
| ECE171L | Analog Electronics Laboratory | 2 |
| ECE173 | High-Speed Digital Design | 5 |
| ECE173L | High-Speed Digital Design Laboratory | 2 |
Lecture/lab combinations count as one course.
Note that CSE 122 or ECE 171 and ECE 171L cannot be used again here.
Plus one upper-division or graduate elective
From the approved elective list or the department’s approved list of electives for the computer engineering major
Networks Concentration Requirements
All students in the computer engineering major take the same core courses, which give the fundamentals of programming and hardware design, supported by the physics and mathematics necessary to understand them. Students must complete all of the courses listed within their selected concentration, and they must complete the capstone sequence. The senior comprehensive requirement for computer engineering majors is satisfied by completion of the capstone course and the exit requirement.
All of the following
| CSE150 | Introduction to Computer Networks | 5 |
| CSE150L | Introduction to Computer Networks Laboratory | 2 |
| CSE156 | Network Programming | 5 |
| CSE156L | Network Programming Laboratory | 2 |
Plus one of the following
| CSE130 | Principles of Computer Systems Design | 5 |
| CSE131 | Introduction to Operating Systems | 5 |
Plus one of the following options
Either the lecture/lab combination of CSE 151 and CSE 151L, or one upper-division or graduate elective from the approved elective list or the department’s approved list of electives for the computer engineering major
Robotics and Control Concentration Requirements
All students in the computer engineering major take the same core courses, which give the fundamentals of programming and hardware design, supported by the physics and mathematics necessary to understand them. Students must complete all of the courses listed within their selected concentration, and they must complete the capstone sequence. The senior comprehensive requirement for computer engineering majors is satisfied by completion of the capstone course and the exit requirement.
Any two of the following
| ECE118 | Introduction to Mechatronics | 5 |
| ECE118L | Introduction to Mechatronics Laboratory | 2 |
| ECE167 | Sensing and Sensor Technologies | 5 |
| ECE167L | Sensing and Sensor Technologies Lab | 2 |
| ECE141 | Feedback Control Systems | 5 |
Lecture/lab combinations count as one course.
Plus one course from the following options
Students may fulfill this requirement by taking the third course from above that was not taken (ECE 118 and ECE 118L, or ECE 167 and ECE 167L, or ECE 141) or by taking any course from the approved elective list or the department's approved list of electives for the robotics and control concentration.
Plus one upper-division or graduate elective
From the approved elective list or the department’s approved list of electives for the computer engineering major
System Programming Concentration Requirements
All students in the computer engineering major take the same core courses, which give the fundamentals of programming and hardware design, supported by the physics and mathematics necessary to understand them. Students must complete all of the courses listed within their selected concentration, and they must complete the capstone sequence. The senior comprehensive requirement for computer engineering majors is satisfied by completion of the capstone course and the exit requirement.
One of the following
| CSE130 | Principles of Computer Systems Design | 5 |
| CSE131 | Introduction to Operating Systems | 5 |
Plus one of the following
| CSE111 | Advanced Programming | 5 |
| CSE115A | Introduction to Software Engineering | 5 |
| CSE134 | Embedded Operating Systems | 5 |
Plus all of the following
| CSE150 | Introduction to Computer Networks | 5 |
| CSE150L | Introduction to Computer Networks Laboratory | 2 |
Plus one of the following options
Either the lecture/lab combination of CSE 151 and CSE 151L, or one upper-division or graduate elective from the approved elective list or the department’s approved list of electives for the computer engineering major
Plus one of the following
| CSE113 | Parallel and Concurrent Programming | 5 |
| CSE156 | Network Programming | 5 |
| CSE156L | Network Programming Laboratory | 2 |
| CSE110A | Fundamentals of Compiler Design I | 5 |
CSE 156 and CSE 156L lecture/lab combination count as one course.
Planners
Below are two sample academic plans for students majoring in computer engineering. Since the plans for the third and fourth years will vary according to the concentration and capstone selected, placeholders for these courses have been indicated with “concentration course” and “capstone course.” As part of the major declaration process students prepare a four-year plan based on a concentration and this may affect the placement of other courses as well. Careful planning at the time of declaration is required to complete the degree within four years. Entering frosh who have little programming experience, are strongly advised to take a programming course in the fall quarter. Students completing the courses in the four-year planners will have satisfied the MF, PR-E, SI, and SR General Education requirements.
Plan One for Entering Frosh
| |
Fall |
Winter |
Spring |
| 1st (frosh) |
MATH 19A |
MATH 19B |
AM 30 |
| CSE 12 & CSE 12L |
PHYS 5A & PHYS 5L |
CSE 30 |
| |
CSE 13S |
|
| 2nd (soph) |
AM 10 |
AM 20 |
CSE 120
|
| PHYS 5C & PHYS 5N |
CSE 100 & CSE 100L
|
CSE 101 |
| CSE 16 |
|
PHYS 5B & PHYS 5M
|
| 3rd (junior) |
ECE 101 & ECE 101L |
CSE 107 |
CSE 185E |
| Concentration course |
Concentration course |
CSE 121 & CSE 121L |
| |
|
Concentration course |
| 4th (senior) |
Capstone course |
Capstone course |
Capstone course |
| ECE 103 & ECE 103L |
Concentration course |
Concentration course |
| |
|
|
Plan Two for Entering Frosh
| |
Fall |
Winter |
Spring |
| 1st (frosh) |
MATH 3 |
MATH 19A |
MATH 19B |
| CSE 20 |
CSE 12 & CSE 12L |
CSE 30 |
| |
|
|
| 2nd (soph) |
PHYS 5A & PHYS 5L |
PHYS 5C & PHYS 5N |
PHYS 5B & PHYS 5M |
| CSE 13S |
CSE 16 |
AM 30 |
| AM 10 |
AM 20 |
CSE 101 |
| 3rd (junior) |
ECE 101 & ECE 101L |
CSE 107 |
CSE 185E |
| CSE 120 |
CSE 100 & CSE 100L |
ECE 103 & ECE 103L |
| |
Concentration course |
Concentration course |
| 4th (senior) |
Capstone course |
Capstone course |
Capstone course |
| CSE 121 & CSE 121L |
Concentration course |
Concentration course |
| Concentration course |
|
|
Below is a sample academic plan for students transferring to UC Santa Cruz in computer engineering for their junior year. It assumes that all lower-division and General Education course requirements have been satisfied. Since the plans for the third and fourth years vary according to the concentration and capstone selected, placeholders for these courses have been indicated with “concentration course” and “capstone course.” As part of the major declaration process students prepare a plan based on a concentration and this may affect the placement of other courses as well. Careful planning at the time of declaration is required to complete the degree within two years.
Plan for Junior Transfers
| |
Fall |
Winter |
Spring |
| 3rd (junior) |
ECE 101 & ECE 101L |
CSE 107 |
CSE 120 |
| CSE 101 |
CSE 100 & CSE 100L |
CSE 121 & CSE 121L |
| CSE 185E |
Concentration course |
Concentration course |
4th (senior)
|
Capstone course |
Capstone course |
Capstone course |
|
| ECE 103 & ECE 103L |
Concentration course |
Concentration course |
| Concentration course |
|
|
Curriculum charts for all BSOE majors are available on the department's website.