Program Information
A.S. Degree - Code 2232 - Catalog 2018/2019
Anindya Paul, Department Chairperson, 386-506-4155, Anindya.Paul@daytonastate.edu
Program Mission, Description, and Outcomes
Mission:
The mission of the Engineering Technology program is to prepare students for employment or provide additional training for persons employed in manufacturing and high technology industries. The program has three specializations - Electronics, Digital Design and Modeling, and Additive Manufacturing. The program prepares students for entering into the manufacturing career cluster.
Description:
The Engineering Technology Associate of Science degree program at Daytona State College prepares students for employment or provides additional training for persons employed in the highly evolving manufacturing (embedded with new technology) and high technology industries. The program also provides specializations in Digital Design and Modeling, Electronics and Additive Manufacturing along with embedded college credit certificates in Applied Technology Specialist, Computer Aided Design and Drafting, and Engineering Technology Support Specialist. The Engineering Technology Associate in Science is fully transferable to four year BSET degree granting institutions.
AS Certificates That Lead To This Degree:
The following AS Certificates are embedded within this degree. You may pursue the AS degree and also earn the AS certificates while completing the requirements for the degree, or pursue the AS certificates to develop or upgrade your skills. Contact your faculty or academic advisor for details and course options.
Electronics Specialization:
082000 - Applied Technology Specialist (16 Semester Hours)
082300 - Engineering Technology Support Specialist (21 Semester Hours)
Digital Design and Modeling Specialization:
082100 - Computer-Aided Design and Drafting (24 Semester Hours)
Outcomes:
Graduates of the program will be able to:
-
Demonstrate an understanding of industrial processes and material properties.
-
Generate and interpret computer-aided drawings.
-
Demonstrate a fundamental understanding of electronics and electricity.
-
Demonstrate an understanding of industrial safety, health, and environmental requirements.
-
Evaluate the use of quality assurance methods and quality control concepts.
-
Design tests using tools, instruments and testing devices.
-
Assess failure in equipment and troubleshoot equipment/devices.
-
Demonstrate appropriate communication skills.
-
Demonstrate appropriate math skills.
-
Evaluate modern business practices and strategies.
-
Demonstrate employability skills.
Note: This program is eligible for federal financial aid and state bright futures.
Approximate Additional Costs
Consult college bookstore for approximate costs of textbooks. Consult college catalog for lab fees. Other costs include a scientific calculator, computer repair tool kit (approx. $20), and soldering kit (approx. $20).
General Education Courses
General Education Core - 15 Credits
Communications Core (6 credits)
| ENC1101 | Introduction to Composition | 3 |
| SPC2608 | Oral Communications/Research/Presentation Skills | 3 |
Mathematics Core (3 credits)
Social Sciences Core (3 credits) - Choose One
Humanities Core (3 credits) - Choose One
Note: Prior to enrollment in college-level English or math courses, some students may be advised to complete college preparatory/developmental course work. See an Academic Advisor to determine developmental course requirements.
Program Specific Courses
Program Core - 18 Credits
| EET1011C | Introduction to Electrical Circuits and Lab | 3 |
| ETD2320C | Computer Aided Drafting I (AutoCAD) and Lab | 3 |
| ETI1110 | Introduction to Quality Assurance | 3 |
| ETI1420 | Manufacturing Processes and Materials | 3 |
| ETI1701 | Industrial Safety | 3 |
| ETM1010 | Mechanical Measurement and Instrumentation | 3 |
Specialization: Electronics
| CET1112C | Digital Fundamentals and Lab | 4 |
| CET2123C | Microcomputer and Basic Digital Communications and Lab | 4 |
| EET1021C | Advanced Electrical Circuits and Lab | 3 |
| EET1141C | Analog Devices and Circuits and Lab | 4 |
| EET1607C | Electronics Assembly and Cabling and Lab | 3 |
| EET2142C | Analog Circuits and Basic Analog Communications and Lab | 4 |
| EGS1000 | Professional Performance for Technicians | 3 |
| EET2949 | Cooperative Education Experience in Electronics | 1-4 |
EET2949 is a variable credit course (1-4 credits). The academic department has approved it for 2 credits in this program.
Specialization: Digital Design and Modeling
| ETD2340C | Computer Aided Drafting II (AutoCAD) and Lab | 3 |
| ETD2357C | Inventor Solid Modeling and Lab | 3 |
| ETD2364C | SolidWorks Solid Modeling and Lab | 3 |
| ETD2368C | SolidWorks II and Lab | 3 |
| ETD2377C | 3D Computer Animation (3D Studio) and Lab | 3 |
| ETD2390C | Introduction to Revit Architecture and Lab | 3 |
| ETD2465C | Tool Design and Lab | 3 |
| ETG2520 | Statics and Strength of Materials | 3 |
| EGS1000 | Professional Performance for Technicians | 3 |
Specialization: Additive Manufacturing
| ETD2371 | Additive Manufacturing I | 3 |
| ETD2372 | Additive Manufacturing II | 3 |
| ETI1411 | Survey of Manufacturing Processes | 3 |
| ETI2122 | Product Testing and Quality Control | 3 |
| ETD2364C | SolidWorks Solid Modeling and Lab | 3 |
| ETD2368C | SolidWorks II and Lab | 3 |
| ETD2465C | Tool Design and Lab | 3 |
| Electronics/ Digital Design and Modeling Elective | 3 |
| Electronics/ Digital Design and Modeling Elective | 3 |
Sample Program of Study
Year 1
1st Semester
| ENC1101 | Introduction to Composition | 3 |
| MAC1105 | College Algebra | 3 |
| ETD2320C | Computer Aided Drafting I (AutoCAD) and Lab | 3 |
| ETI1110 | Introduction to Quality Assurance | 3 |
| ETI1701 | Industrial Safety | 3 |
2nd Semester
| SPC2608 | Oral Communications/Research/Presentation Skills | 3 |
| Social Sciences Core | 3 |
| EET1011C | Introduction to Electrical Circuits and Lab | 3 |
| ETI1420 | Manufacturing Processes and Materials | 3 |
| ETM1010 | Mechanical Measurement and Instrumentation | 3 |
Summer Semester
Year 2 Specialization: Electronics
1st Semester
| CET1112C | Digital Fundamentals and Lab | 4 |
| EET1021C | Advanced Electrical Circuits and Lab | 3 |
| EET1141C | Analog Devices and Circuits and Lab | 4 |
| EGS1000 | Professional Performance for Technicians | 3 |
2nd Semester
| CET2123C | Microcomputer and Basic Digital Communications and Lab | 4 |
| EET1607C | Electronics Assembly and Cabling and Lab | 3 |
| EET2142C | Analog Circuits and Basic Analog Communications and Lab | 4 |
| EET2949 | Cooperative Education Experience in Electronics | 1-4 |
| Total Credit Hours: | 27 |
EET2949 is a variable credit course (1-4 credits). The academic department has approved it for 2 credits in this program.
Year 2 Specialization: Digital Design and Modeling
1st Semester
| ETD2340C | Computer Aided Drafting II (AutoCAD) and Lab | 3 |
| ETD2357C | Inventor Solid Modeling and Lab | 3 |
| ETD2364C | SolidWorks Solid Modeling and Lab | 3 |
| EGS1000 | Professional Performance for Technicians | 3 |
| ETG2520 | Statics and Strength of Materials | 3 |
2nd Semester
| ETD2368C | SolidWorks II and Lab | 3 |
| ETD2390C | Introduction to Revit Architecture and Lab | 3 |
| ETD2377C | 3D Computer Animation (3D Studio) and Lab | 3 |
| ETD2465C | Tool Design and Lab | 3 |
| Total Credit Hours: | 27 |
Year 2 Specialization: Additive Manufacturing
1st Semester
| ETD2364C | SolidWorks Solid Modeling and Lab | 3 |
| ETD2371 | Additive Manufacturing I | 3 |
| ETD2368C | SolidWorks II and Lab | 3 |
| Electronics/ Digital Design and Modeling Elective | 3 |
| ETI2122 | Product Testing and Quality Control | 3 |
2nd Semester
| ETD2372 | Additive Manufacturing II | 3 |
| Electronics/ Digital Design and Modeling Elective | 3 |
| ETD2465C | Tool Design and Lab | 3 |
| ETI1411 | Survey of Manufacturing Processes | 3 |
| Total Credit Hours: | 27 |
Total Credit Hours: 60